Precision Gearhead Lathe KGY-1440GH

Call for Pricing
Precision Gearhead Lathe KGY-1440GH

- No change gear in tool box.
- The thread category complete, not only cutting metric thread and imperial thread, but also cutting diametric thread and module thread.
- Minimum Cross feed 0.01mm/rev, Minimum Longitudinal feed 0.046mm/rev.


C0636D – KGY-1440GH

Swing over bed


Swing over cross slide


Swing in gap diameter


length in gap


Center height



Admits between

750mm(30") or 1000mm(40")

Spindle bore

38mm(1-1/2") or 40mm(1-9/16")

Spindle nose

D1-4 or D1-5

Taper in nose

No 5 Morse

Speeds number


Speeds range


Cross slide travel

170mm (6-11/16")

Compound rest travel

95mm (3-9/16")

Lead screw thread

8T.P.I. or 3mm pitch

Feed rod diameter

19mm (3/4")

Cutting tool max section

16mm×16mm (5/8"×5/8")

Threads imperial pitches

42 Nos. 4-112T.P.I

Threads metric pitches

44 Nos. 0.1-7mm

Threads diametral pitches

25 Nos. 16-112DP

Threads module pitches

34 Nos. 0.1-1.75MP

Longitudinal feeds imperial

24 Nos. 0.00168-0.1175"/rev

Longitudinal feeds metric

24 Nos. 0.046-3.249 mm/rev

Cross feeds imperial

32 Nos. 0.00046-0.03231"/rev

Cross feeds metric

24 Nos. 0.01-0.703 mm/rev

Quill diameter

32mm(1-1/4") or 42mm (1-21/32")

Quill travel

100mm (3-15/16")

Quill taper

No3 Morse

Main motor power

1.5kW (2HP)

Coolant pump power

40W (1/16HP)

Packing size (cm)

168 ×76 ×153 (750mm) or 193×76×153 (1000mm)

NG/GW (kg)

510/630 (750mm) or 540/645 (1000mm)

Standard Accessories:
1、Reduction Sleeve 5/3#
2、Center MT3#(Dead Center, Alloy Center)
3、Three Jaw Chuck 160mm
4、Chip Tray
5、Splash Guard
6、Tool Box & Tools 1set
Special Accessories:
1、Four Jaw Chuck
2、Face Plate
3、Driving Plate
4、Quick Change Tool Post
5、Steady Rest
6、Follow Rest
8、Coolant System
9、Taper Turning Attachment
10、Live Center
11、Drill Chuck
12、Chuck Cover
13、Tool Post Cover
14、Leadscrew Cover
15、Work Light

Please Request a Quote