Print

Birmingham Hydraulic Press Brake HB-240157


Call for Pricing
New "Birmingham" Hydraulic Press Brake
Model: HB-240157
(Note:  photo is of the 175 Ton x 126" model)

Specifications:
Bending Length: 157"
Max Pressure (Tons): 240
Distance Between Uprights: 130"
Ram Stroke: 8"
Table Width: 8"
Distance Between Table/Ram: 16"
Oil Tank: 100 gallons
Main Motor: 20 hp
Approach Speed (in/sec): 4
Bending Speed (in/sec): .23
Return Speed (in/sec): 2.36
Power Back Gauge (in): 32
Back Gauge Motor (hp): 1
Throat Depth: 10"

Main Features:
CONSTRUCTION
The Frame is made of hight tension strength stress relieved steel 
plate and rigidly bolted/welded to manufacture strong/u-transform 
machine body.
WIDE GUIDEWAY
To ensure the movement of the guideblock more smoothly and 
stable for high accuracy.
MECHANICAL PARALLEL DEVICE 
The compulsory synchronization of the mechanical structure to 
ensure the top die and bottom die are fully parallel at any position 
of stroke movement.
HYDRAULIC OIL TANK & PUMP
A large tank allows the ail to run smoothly and efficiently. The high-
efficiency, low-noise pump improves the quality of the working 
environment. 
STROKE
Depth positioning by accurate mechanical stops inside the cylinder 
to ensure every bend is to the same exact angle. Adjustable strokes 
shortens machine time.
SAFETY FOOT CONTROL
Removable foot control pedal with safety protection. The upper die 
beam is raised back to the top position immediately upon the 
operator removing his foot from the pedal.
HYDRAULIC SYSTEM
High-efficiency hydraulic circulation system, quality solenoids and 
two powerful cylinders provide maximum and stable output to 
execute excellent performance. Ram downward by two-step speed, 
fast-speed approaching and slow-speed press bending to shorten 
the cycle time.   Easy setting work pressure by stepless regulator 
with overload protection device to provide proper pressure.
SINGLE-SIDE MICRO ADJUSTMENT
Two micro-fine adjusting bending angles, this device provides two 
directional adjustments, increase or decrease bending angle(s), to 
achieve a uniform angle on both ends of the bent workpeice.
DIES
One-piece upper forming punch. One-piece 4-way bottom lower die. 
Multi-size V-slot design to meet most bending applications.
MANUAL BACK GAUGE
Precision ballscrew type back gauge with readout disply and micro 
adjustor. Resolution 0.004". 
Hydraulic bottom die angle compensation.
Power bending angle setup.
Jog, single and auto bending modes.

Standard Equipment:
24" or 32" Power ballscrew back gauge with digital counter display 
and front control.
24" (2) front support arms. 
Powered bending angle setting device.
Hydraulic bottom-die angle compensation.
One top die and one 4-way bottom die (6 V's for 66 ton and over)
Control panel with all switch low voltage wired. 
Removable foot pendal with safety protection housing. 
Tool box with maintenance tools and leveling pads. 

Optional Equipment (call for pricing):
Safety sensor protection system. 
Power grease injecting system. 
Larger throat depth per customer's request.
Special custom dies. 
2 Axis CNC back gauge with German ELGO #P8822

Please Request a Quote