Print

Birmingham Hydraulic Press Brake HB-3361


Call for Pricing
New Birmingham Hydraulic Press Brake HB-3361

Description
- 33 TONS X 61"

Standard Equipment:
  • 24" or 32" ballscrew back gauge with digital counter display and front control (optional for 22/33/38/50 ton model).
  • 24" front operated manual ballscrew back gauge with digital counter and micro adjustor (22/33/38/50 ton models).
  • 24" (2) front support arms.
  • Powered benging angle setting device (opt: 22/33/38/50 ton models).
  • Hydraulic bottom-die angle compensation (opt: 22/33/38/50 ton models).
  • One top die and one 4-way bottom die (6Vs for 66ton and over, single V for 50tons and lower).
  • Control panel with all switch low voltage wired.
  • Removable foot pendal with safety protection housing.
  • Tool box with maintenance tools and leveling pads.

Main Features:
  • The Frame is made of hight tension strength stress relieved steel plate and rigidly bolted/welded to manufacture strong/u-transform machine body. 2.
  • To ensure the movement of the guideblock more smoothly and stable for high accuracy.
  • The compulsory synchronization of the mechanical structure to ensure the top die and bottom die fully parallel at any position of stroke movement.
  • A large tank allows the ail to run smoothly and efficiently. The high-efficiency, low-noise pump improves the quality of the working environment.
  • Depth positioning by accurate mechanical stops inside the cylinder tp ensure every bending to the same angle. Adjustable strokes shorten machine time.
  • Removable foot control pedal with safety protection. The upper die beam is raised back to the top position immediately upon the operator removing his foot from the pedal.
  • High-efficient hydraulic circulation system, quality solenoids and two powerful cylinders provide maximum and stable output to execute excellent performance. Ram downward by two=step speed, fast-speed approaching and slow -speed press bending to shorten the circulation time. Easy setting work pressure by stepless regulator with overload protection device to provide a proper pressure.
  • Two micro-fine adjusting bending angles, this device provides two directional adjustments, increase or decrease bending angle(s), to achieve uniform angle on both ends of the bent workpeice.
  • One-piece upper forming punch. One-piece 4-way bottom lower die. Multi-size V-slot design to meet most bending applications.
  • Motorized precision ballscrew type back gauge with readout disply and micro adjustor. Resolution 0.004".
  • Hydraulic bottom die angle compensation.
  • Power bending angle setup.
  • Jog, single and auto bending modes.
  • Note: Model shown is HB 5059.

Standard Equipment:

- FOLLOW REST
- 18" FACE PLATE
- 6-1/2" STEADY REST W/ROLLERS
- 12" 3-JAW CHUCK
- 16" 4-JAW CHUCK
- 10" DRIVE PLATE
- OPERATION & PARTS MANUAL
- COOLANT SYSTEM
- HAOLGEN WORK LIGHT
- REMOVABLE GAP
- 4-WAY TOOL POST
- THREAD CHASING DIAL
- HAND OIL PUMP FOR WAYS
- (2) DEAD CENTERS
- REDUCING SLEEVE MT7/MT5
- TOOL KIT WITH TOOLS
- 4-POSITION AUTOMATIC KICK-OUT
- LONGITUDINAL CARRIAGE STOP
- FULL LENGTH FOOT BRAKE
- FULL LENGTH SPLASH GUARD

Please Request a Quote